RimCaster GFRC Continuous Mixer

RimCaster Continuous Mixer (standard)

  • 3HP Direct Gear Drive Continuous Mixer, Chassis Mounted with Rear Hinge Door for Hopper Cleanout
  • 3 Phase 208/230 Electric Power. 20 Ft. Power Cord (specify plug)
  • NEMA 4X Control Box with Variable Speed Controller, Start/Stop
  • DC Motor Controlled Triple Diaphragm Pump for Water, Polymer and Plasticizer Injection in the Mix Chamber with Clean Water Purge
  • 90 PSI Air, Fresh Water (garden hose hook-up) and 208/230V 3 phase 20 amp circuit required
  • Battery operated digital flow meter with liquid flow control mounted on operator reachable swing arm including on/off/on toggle switch for powder only or powder and liquid together
  • Bypass Switch for Liquid Only for Fresh Water Prime and Purge
  • 250 Lb. Material Hopper with Vibrator and Removable Metering Screw for E-Z clean-out
  • E-Z to Remove Metering Bushing
  • Metering Screw with Breaker Bars
  • 7 Ft. Liquid Siphon Assy.

Options

  • Additional metering screws of various outputs
  • Metering bushing
  • Hopper Extension
  • Floor Base Extension
  • Ground Hopper Continuous Powder Feed.

Photo Gallery


Our Specialties

RimCraft has always been the leader in Gypsum processing equipment. Now that FRP manufactures the entire RimCraft line, expect even better.  We are currently building our own pumping system that promises to bring a new edge to our product. FRP builds both Spray for Facecoat and Chopper for backup as well as accelerated casting systems.

FRP is fast becoming a significant force in the GFRC equipment market. Already recognized as the leader in GFRG, we have applied these details to our Cement line. We have found that the details are what make a huge difference in promoting flow and EZ cleaning of these difficult-to-pump materials. Look for the RimSpray GFRC Mini for ease of maneuverability in small shops (ie: Concrete Countertops) and outdoor applications. The full size RimSpray Black Max unit is taking the GFRC Industry by storm!

FRP Equipment manufactures a variety of specialty Resin-Based equipment for the composites industry. From low-pressure diaphragm/ slave for RTM and Infusion to variable ratio Urethane and Epoxy units. We also excel in systems for Spray Granite Gel Coats along with sprayable Polyester Putties and Barrier Coats. We build the finest Putty Dispensers and Resin Casting systems on the market.